BYD Body Kit Regulations in Brazil: What the Law Requires in Practice
If you are fitting a body kit in Brazil, the short answer is: the kit is legal, but three items must stay on the vehicle — the wheel wrench, the warning triangle and the jack — and the whole assembly must not change the lighting, the licence plate or the width of the car. Most of the confusion around body kits in Brazil does not come from the law itself, but from three specific points. This guide sets out what the rule actually requires in practice.
This is informational content. For the final legal decision on your case, confirm it with the professional who will carry out the installation and with your local DETRAN.
What the traffic rules allow
The Brazilian Traffic Code and the resolutions of CONTRAN allow bodywork items to be modified, within clear limits. What is allowed:
- Fitting bumpers, spoilers and side skirts that do not interfere with the lighting, the licence plate or the safety devices.
- Homologated parts, with a conformity certificate and product marking (both must be preserved — the marking cannot be removed).
- Changes to width up to the maximum limit set for the vehicle, with the proper approval and measurement.
What is not allowed, under any circumstances:
- Altering the lighting system — headlights, tail lights and reversing lights must keep their factory specifications.
- Changing the position or shape of the licence plate — the plate must stay legible, in its original position, with the vehicle identification plate (PIV) affixed.
- Compromising the structure of the bodywork with cuts or welds in the longitudinal members, pillars or wheel arch areas.
- Obstructing the driver's view, the rear window, the headlights or the licence plate.
- Fixing the kit with screws that pierce the body panels or interfere with fuel, electrical or brake lines.
The 3 items almost everyone forgets
If you have not seen the product overview yet, the guide what a body kit for BYD is covers the basics. For drilling-free fitting, see body kit installation.
This is the most common cause of a fine during a vehicle inspection after fitting a body kit. The rule does not change with the modification:
| Item | Mandatory? | What usually happens |
|---|---|---|
| Wheel wrench | Yes, always | It disappears when the kit goes on, because the larger wheel takes up the boot space. The replacement wrench is usually the one for the original vehicle's spare wheel |
| Warning triangle | Yes, always | Forgotten in most installations. It needs to be accessible, not locked away in the boot |
| Jack | Yes, always | Check that the jack supplied with the vehicle still works for the wheel being fitted — with larger wheels, jack compatibility has to be verified |
A note on larger wheel sizes: if you fit wheels with a larger diameter than the originals, confirm that the jack is compatible with the new wheel and keep the original jack accessible. Also check the clearance between the larger wheel and the kit — interference between the rim and the side skirt or bumper is the most common cause of noise and rubbing on the road.
Certificate and marking: do not remove
A homologated part carries certified-product marking — a number, the manufacturer's brand and an identification code. That marking is what proves, during an inspection, that the part is legal.
Two common mistakes:
- Painting over the marking. The marking has to stay visible. The correct approach is to paint the part while keeping the marking legible, or to paint in a way that does not cover it.
- Buying a part without a certificate. A part of unverified origin is the main source of trouble during enforcement checks, and the responsibility falls on the vehicle owner.
When buying from a supplier, ask for the batch conformity documentation and the product identification. Serious suppliers make these available; Ruiton provides the documentation available per batch and market on request.
When the identification plate is required
The PIV (Vehicle Identification Plate) records relevant changes to the bodywork. As a rule, it is required when the modification changes characteristics listed on the vehicle registration record — among them, the width and height dimensions and the configuration of items such as bumpers.
The practical point: if the fitted kit produces a width different from the original — which happens with kits that include wide side skirts or bumper extensions — the vehicle may then need a new registration record and a new PIV. That is why it is worth checking the width of the whole assembly before fitting and, when necessary, running the change process together with the installation.
To reduce risk at this point: fit parts that keep the original width or stay within the limit set in the model's registration record. That is the information your installer needs before starting.
Lighting: the point that causes the most trouble
Many kits include air intakes, cut-outs and details that sit close to the headlights. If the assembly interferes with the headlight beam, the result is a shorter throw and glare for drivers behind — and that is checked both on the road and at inspection.
The practical rule is simple: no part of the kit may enter the lighting zone or block the beam. That is why kits that follow the original grille keep the air opening in exactly the same place. When fitting, visually check the headlight beam with the kit in place and, if in doubt, ask an inspector to verify it.
Checklist before leaving the workshop
- Wheel wrench, triangle and jack present and accessible.
- Jack compatible with the fitted wheel.
- Certification marking visible on every part.
- No part interfering with the headlight beam, the licence plate or the rear window.
- Licence plate legible, in its original position.
- Clearance checked between larger wheels and the kit (no rubbing).
- Parts fixed at the original mounting points, with no drilling into the body panels.
- Checked whether the registration record / PIV needs updating because of the width.
Frequently asked questions
Is a body kit legal in Brazil?
Yes. Bodywork modification is allowed as long as the part is homologated, is identified, does not change the lighting or the licence plate, does not compromise the structure and does not obstruct visibility. What the rule requires is that the part be legal and that the assembly not affect homologated items.
Can I remove the certificate marking?
No. The certified-product marking has to remain visible. If you paint the part, the paint must preserve the identification.
Do I need to update the vehicle registration record?
It depends on the case. If the modification changes relevant dimensions — especially the width of the assembly — a new registration record and a new vehicle identification plate may be required. Confirm with your installer and with DETRAN before fitting.
Do larger wheels require anything specific?
Check that the jack is compatible with the new wheel, keep the original jack accessible and check the clearance between the rim and the kit. A larger wheel with kit interference causes rubbing and noise.
Can I use a body kit on a ride-hailing car?
The traffic rule is the same. But you also need to consider the requirements of the ride-hailing company and the vehicle insurer, which can be stricter. Check before fitting.
Do you supply the conformity documentation?
Yes — on request we provide the documentation available per batch and destination market. Ask for it in your quote, stating the country and the application (resale, fleet or OEM assembly).
Next step
When you place the order, ask for the product identification and the batch conformity documentation. With those in hand, the installation stays within the rules and the inspection becomes predictable.
Note: the figures, lead times and MOQ in this guide are Ruiton line references and may vary by model, kit composition and batch. Specific test reports (RoHS/REACH) are supplied on request. Regulations can change, so always check the latest official texts and confirm with the competent authorities.
See parts by model Request a quote on WhatsApp
Other categories
Products in this line
- Sport body kit BYD Dolphin (2021-2024)
- Sport body kit BYD Dolphin (2021-2024)
- Sport body kit BYD Han (2022-2025)
- Sport body kit BYD Han (2024)